 |
 |
| Technical data | ||||||
|---|---|---|---|---|---|---|
|
TYPE
|
h
|
a
|
AxB
|
nxØs
|
m
|
Mg
|
|
m
|
m
|
mm
|
mm
|
kg
|
kNm
|
|
|
F150/200-PS
|
1,5
|
0,3
|
200×200
|
4xM20
|
225
|
31,5
|
Design:
The foundation is made of C16/20 (B20) class reinforced concrete with penetrations for routing electrical cables with a maximum cross-section of 4×95 mm2. The foundation is finished with a steel cover with a hidden system of fastening the base of the 4xM20 column, hinge fasteners and steel elements of the foundation: anchors, hooks and bolts. All fasteners are galvanized.
Application:
The F150/200-PS foundation is intended for setting the below safe street light poles equipped with hidden foot:
The F150/200-PS foundation, together with safety poles listed below, ensure the LE energy absorption category for the entire pole-foundation structure (slow the vehicle down);
– steel poles t = 3mm, straight, round section, conical, series S-_PCN-3PS; 90PCN-3PS, 100PCN-3PS, 110PCN-3PS;
– steel poles t = 3mm, with arm, round section, conical, series S-_PCN-3PS; 100CN-3PS, 110CN-3PS, 120CN-3PS.
LE category structures – low energy absorption (slow the vehicle down);
– recommended for areas where the safety hazard for pedestrians or cyclists is reduced due to the speed limit of 50 km/h or less.
The F150/200-PS foundation, together with safety poles listed below, ensure the HE energy absorption category for the entire pole-foundation structure (they stop the vehicle or slow it down significantly);
– steel poles t = 2mm, straight, round section, conical, series S-_PC-PS; S-100PC-PS, S-110PC-PS, S-100PC-PS;
– steel poles t = 2mm, with arm, round section, conical, series S-_C-PS; S-100C-PS, S-110C-PS, S-100C-PS;
– steel poles t = 2mm, straight, octagonal section, conical, series S-_P/8-PS; S-100P/8-PS, S-110P/8-PS, S-120P/8-PS;
– steel poles t = 2mm, with arm, octagonal section, conical, series S-_/8-PS; S-100/8-PS, S-110/8-PS, S-120/8-PS.
HE category structures – high energy absorption (stop the vehicle or slow it down significantly);
– recommended for zones of increased pedestrian and bicycle traffic and pedestrian crossings, where there is a risk of a secondary collision with other road users or pedestrians and obstacles within the built-up area as they can stop the vehicle or slow it down significantly at higher speeds, reducing the effects of secondary collisions.
Downloadable:
TYPE F150/200-PS FOUNDATIONS for SAFETY LAMP POSTS – Catalog page